Blogs

The blogs are a good way to uncover the local biking culture

With the blogs you can follow-up on local stories about local personalities, local news, opinions and events.

Bloggers often write stories from a personal experience or in a way that presents news, local topics or relavent opinions.

If you want to subscribe to the site's blogs with your own RSS aggregator click the icon in the menu above, or you can subscribe to each category individually below.

Tags

20 blogs
  • 05 Oct 2016
    Monday October 3rd Royal Oak's city commission members hosted a round table town hall discussion to discuss Royal Oak's new non-motorized transportaion plan.  The meeting gave an opportunity for residents and non-residents to voice their views and opinions about biking in and around the city. There were about 50 individuals participating in the discussion. Many spoke about their concerns regarding Main Street's now defunct bike lanes, local laws and ordanaces and how the city needed to educate motorists more about road bikeing. The Mayor Jim Ellison and the commission talked about perhaps implementing an Idaho stop law at which legally treats treat stop signs as though they were yeild signs or red lights as though they were stop signs. But nothing was confirmed. Some of the commissioners, that admittingly don't ride bikes, stated that they wanted to see the sharrows removed from the main streets. The mayor defended the sharrows saying that, "Taking the sharrows off the roads won't change the conditions for cyclists." And that, "The sharrows indicate to motorists that bicyclists will be on the roads." Thus adding a level of security that otherwise wouldn't be there.
    288 Posted by Aaron Lad
  • Monday October 3rd Royal Oak's city commission members hosted a round table town hall discussion to discuss Royal Oak's new non-motorized transportaion plan.  The meeting gave an opportunity for residents and non-residents to voice their views and opinions about biking in and around the city. There were about 50 individuals participating in the discussion. Many spoke about their concerns regarding Main Street's now defunct bike lanes, local laws and ordanaces and how the city needed to educate motorists more about road bikeing. The Mayor Jim Ellison and the commission talked about perhaps implementing an Idaho stop law at which legally treats treat stop signs as though they were yeild signs or red lights as though they were stop signs. But nothing was confirmed. Some of the commissioners, that admittingly don't ride bikes, stated that they wanted to see the sharrows removed from the main streets. The mayor defended the sharrows saying that, "Taking the sharrows off the roads won't change the conditions for cyclists." And that, "The sharrows indicate to motorists that bicyclists will be on the roads." Thus adding a level of security that otherwise wouldn't be there.
    Oct 05, 2016 288
  • 01 Apr 2017
    IndustryWeek.com ― After decades of off-shoring and outsourcing established big name bike brands to other countries, the American made industry is now bringing the art of bicycle manufacturing back into the United States. This is happening as oversea trading costs continue to rise and as companies are now realizing the value of local win-win business models. A sign of things to come This shift is happening across the entire spectrum of cycling, from high-end boutique racing bikes, to 3-wheeled trikes, to high-volume manufacturing & assembly; dedicated American biking entrepreneurs are now beginning to reshore bike production into the United States. There is a perfect convergence of factors is happening in the United States these days; rising offshore trading costs, young entrepreneurs seeking bicycle-driven win-win business models, there’s a huge increase of people seeking healthier lifestyle choices, there’s a growing popularity of urban biking with biking-infrastructure interest taking root across the nation like never before, and there’s a new-found patriotism for more robust local biking-driven economies and it’s happening everywhere you look. Domestic production The outsourcing began sometime in the 1980s when Schwinn began shifting its manufacturing to Asia in an effort to take advantage of low working wages; other high-volume manufacturers like Huffy and Trek soon began to follow. By 2015 only 2.5% of the estimated 12.6 million bikes (not including kid’s bikes) that were sold in the U.S. were made in America. In 1990 the United States was one of the top five highest producing bike manufacturing countries on the planet at around 5.5 million units per year. As more outsourcing occurred, the bike production decreased to around 200k. But in 2015 the trend-line began to swiftly take a new direction. In 2015 when offshore wages began to increase, bike manufacturers started to rethink their offshore manufacturing and their material source decisions. Driven by the increasing offshore costs, the savings in automation, and the benefits of having “Made in USA” branding, reshoring bike manufacturing in the states began to make really good sense. Bicycle Corporation of America (BCA) a Division of Kent International Arnold Kamler’s family had been in the bicycle business for a century when, in 1991, he regretfully shuttered his New Jersey bicycle plant, Bicycle Corporation of America (BCA), and moved all of their production offshore. The USA factory had been producing 30% of their bicycles. However, offshore costs began rising enough to make Kamler, now the chairman and CEO of Kent International, begin to consider reshoring some bike manufacturing to the U.S. In 2008, Arnold said, “It was a perfect storm. You had steel, aluminum, oil, plastics, ocean freight and currency – everything at one time going up. I spent about six weeks traveling all over Asia, asking myself, ‘If not China, then where?’ The answer seemed to be nowhere for bicycles. The idea in the back of my mind was that maybe one day we could do it here in the U.S.” Then, in March 2013, at the Walmart U.S. Manufacturing Suppliers Summit for the Walmart 'Made in America' initiative, Arnold met with South Carolina Gov. Nikki Haley and began discussing the possibility of Kent opening a factory in South Carolina, but the numbers had to make sense. With an annual employee turnover rate of 120% at his Shanghai factory and offshore costs soaring, Kamler turned to innovation and automation to close the total cost gap and return work to the U.S. It would take innovative ideas like thousands of feet of overhead conveyors, the latest wheel-building equipment and other process improvements for the reshoring transition to make economic sense. Kamler’s multi-dimensional approach also included a guarantee from Gov. Haley that Kent’s energy needs and training requirements would be filled. Today, Kent International, Inc. is a high-volume, mass-market bike supplier to Walmart, Toys “R” Us, Target and other retailers. This year they will roll out approximately 350,000 bikes produced in the Manning, S.C. factory, operating with 115 employees and assembling bikes at a rate that would require twice as many workers offshore. Kent has no plans to stop importing and proudly proclaims that they are not trying to reshore their business, they are trying to reshore their competitors’ business. He explained, “We sold 49% of our company to our major bicycle supplier from China in 2010.  When we decided to go forward with our USA production, I pledged to them that the idea was not to replace our import bikes with USA bikes but instead to try to continue to grow our import business and by growing our USA business, this would be stealing market share from other importers.” Americans want to buy more “Made in USA” products American made, locally sourced preference can be an important cornerstone for bringing U.S. manufacturing jobs back home. Recent consumer preference surveys, show there is a definitive preference for American-made goods: 97% have a positive view of the goods manufactured in the U.S. Americans on the whole believe it is important to manufacture in the U.S., and think it is wise to take steps to support American manufacturing, particularly bicycle manufacturing. The Motor City Turns to Bike City In the past several years at least seven bike brands have chosen Detroit as the place to manufacture and assemble bikes. Some brands are classically inspired handcrafted bikes like the Detroit Bicycle Company, some are super cool unique trail bikes like the Slingshot Bikes brand. A local Detroit firefighter founded the locally sourced 313 Bicycle Works. The fancy baggage suitcase and watch maker, Shinola, is now assembling high-end commuter bikes in their Detroit location with forks and frames coming from their partner, Waterford Precision Cycles. Detroit’s largest bike manufacturer Detroit Bikes has plans to produce as many as 50,000 bikes this year; they also won a high-stakes bid with the city that will produce bikes for the new Detroit Bike Sharing Program. Detroit Bikes Wins Bike Sharing Contract When Detroit Bikes first opened the doors in 2013, a lot of people “thought it was really goofy,” says founder Zak Pashak, who chose Detroit because it was “a good spot for urban revitalization to take hold.” Despite the fact that bicycle manufacturing had been disappearing as bike companies followed each other offshore to low cost countries, Pashak, a Canadian transplant, was fascinated with Detroit from childhood through popular TV shows and wanted to be part of its economic rebound. He thought a basic bike, perfect for urban areas, might have potential in the U.S. market. Detroit Bikes’ is set to produce 10,000 bikes this year and in doing so will create 50 jobs in a city with high unemployment. Production began slowly until Pashak got his first big order from New Belgium Brewing in Fort Collins, Colo. The company was having trouble finding a U.S.-made bike. Pashak won the 2,500 bike order and was on his way. In the spring of 2016 Pashak won a contract with Motivate, a company that runs bike-sharing programs in 12 metro areas, and uses Detroit Bikes’ assembled bicycles in New York, Boston, and Jersey City. A domestically produced bike gave Motivate a pivotal negotiating advantage when dealing with city governments, yet until finding Detroit Bikes, they struggled to find a U.S. manufacturer that could handle the quantity and specifications they needed. The bikes are assembled in Detroit but the aluminum frames come from Asia. However, Detroit Bikes makes the wheels in-house because they are expensive to transport. According to Motivate’s CEO Jay Walder, manufacturing the wheels domestically enabled the company to reduce the number of shipping containers by two-thirds. Detroit Bikes’ is set to produce 10,000 bikes this year and in doing so will create 50 jobs in a city with high unemployment. Ford Rolls Into the San Francisco Area on a “New” Mode of Transportation In an effort to rework their business strategy for a future where fewer people own cars and shared transportation is commonplace, Ford recently announced it would be collaborating with bike-sharing provider Motivate in San Francisco. “Cities globally are dealing with increased congestion, a growing middle class and environmental issues,” says Jim Hackett, head of the new Ford Smart Mobility unit. “By expanding our business model to include new forms of transportation -- from bikes to dynamic shuttles and more -- we are introducing new customers to Ford and creating new revenue and profit opportunities for the future.” Ford and Motivate are working to add new stations across the Bay Area and expect to expand the network by 7,000 bikes by the end of 2018. Read the Full Article @ IndustryWeekly.com Trunicated and edited, original article by Harry Moser @ IndustryWeek.com
    241 Posted by Aaron Lad
  • IndustryWeek.com ― After decades of off-shoring and outsourcing established big name bike brands to other countries, the American made industry is now bringing the art of bicycle manufacturing back into the United States. This is happening as oversea trading costs continue to rise and as companies are now realizing the value of local win-win business models. A sign of things to come This shift is happening across the entire spectrum of cycling, from high-end boutique racing bikes, to 3-wheeled trikes, to high-volume manufacturing & assembly; dedicated American biking entrepreneurs are now beginning to reshore bike production into the United States. There is a perfect convergence of factors is happening in the United States these days; rising offshore trading costs, young entrepreneurs seeking bicycle-driven win-win business models, there’s a huge increase of people seeking healthier lifestyle choices, there’s a growing popularity of urban biking with biking-infrastructure interest taking root across the nation like never before, and there’s a new-found patriotism for more robust local biking-driven economies and it’s happening everywhere you look. Domestic production The outsourcing began sometime in the 1980s when Schwinn began shifting its manufacturing to Asia in an effort to take advantage of low working wages; other high-volume manufacturers like Huffy and Trek soon began to follow. By 2015 only 2.5% of the estimated 12.6 million bikes (not including kid’s bikes) that were sold in the U.S. were made in America. In 1990 the United States was one of the top five highest producing bike manufacturing countries on the planet at around 5.5 million units per year. As more outsourcing occurred, the bike production decreased to around 200k. But in 2015 the trend-line began to swiftly take a new direction. In 2015 when offshore wages began to increase, bike manufacturers started to rethink their offshore manufacturing and their material source decisions. Driven by the increasing offshore costs, the savings in automation, and the benefits of having “Made in USA” branding, reshoring bike manufacturing in the states began to make really good sense. Bicycle Corporation of America (BCA) a Division of Kent International Arnold Kamler’s family had been in the bicycle business for a century when, in 1991, he regretfully shuttered his New Jersey bicycle plant, Bicycle Corporation of America (BCA), and moved all of their production offshore. The USA factory had been producing 30% of their bicycles. However, offshore costs began rising enough to make Kamler, now the chairman and CEO of Kent International, begin to consider reshoring some bike manufacturing to the U.S. In 2008, Arnold said, “It was a perfect storm. You had steel, aluminum, oil, plastics, ocean freight and currency – everything at one time going up. I spent about six weeks traveling all over Asia, asking myself, ‘If not China, then where?’ The answer seemed to be nowhere for bicycles. The idea in the back of my mind was that maybe one day we could do it here in the U.S.” Then, in March 2013, at the Walmart U.S. Manufacturing Suppliers Summit for the Walmart 'Made in America' initiative, Arnold met with South Carolina Gov. Nikki Haley and began discussing the possibility of Kent opening a factory in South Carolina, but the numbers had to make sense. With an annual employee turnover rate of 120% at his Shanghai factory and offshore costs soaring, Kamler turned to innovation and automation to close the total cost gap and return work to the U.S. It would take innovative ideas like thousands of feet of overhead conveyors, the latest wheel-building equipment and other process improvements for the reshoring transition to make economic sense. Kamler’s multi-dimensional approach also included a guarantee from Gov. Haley that Kent’s energy needs and training requirements would be filled. Today, Kent International, Inc. is a high-volume, mass-market bike supplier to Walmart, Toys “R” Us, Target and other retailers. This year they will roll out approximately 350,000 bikes produced in the Manning, S.C. factory, operating with 115 employees and assembling bikes at a rate that would require twice as many workers offshore. Kent has no plans to stop importing and proudly proclaims that they are not trying to reshore their business, they are trying to reshore their competitors’ business. He explained, “We sold 49% of our company to our major bicycle supplier from China in 2010.  When we decided to go forward with our USA production, I pledged to them that the idea was not to replace our import bikes with USA bikes but instead to try to continue to grow our import business and by growing our USA business, this would be stealing market share from other importers.” Americans want to buy more “Made in USA” products American made, locally sourced preference can be an important cornerstone for bringing U.S. manufacturing jobs back home. Recent consumer preference surveys, show there is a definitive preference for American-made goods: 97% have a positive view of the goods manufactured in the U.S. Americans on the whole believe it is important to manufacture in the U.S., and think it is wise to take steps to support American manufacturing, particularly bicycle manufacturing. The Motor City Turns to Bike City In the past several years at least seven bike brands have chosen Detroit as the place to manufacture and assemble bikes. Some brands are classically inspired handcrafted bikes like the Detroit Bicycle Company, some are super cool unique trail bikes like the Slingshot Bikes brand. A local Detroit firefighter founded the locally sourced 313 Bicycle Works. The fancy baggage suitcase and watch maker, Shinola, is now assembling high-end commuter bikes in their Detroit location with forks and frames coming from their partner, Waterford Precision Cycles. Detroit’s largest bike manufacturer Detroit Bikes has plans to produce as many as 50,000 bikes this year; they also won a high-stakes bid with the city that will produce bikes for the new Detroit Bike Sharing Program. Detroit Bikes Wins Bike Sharing Contract When Detroit Bikes first opened the doors in 2013, a lot of people “thought it was really goofy,” says founder Zak Pashak, who chose Detroit because it was “a good spot for urban revitalization to take hold.” Despite the fact that bicycle manufacturing had been disappearing as bike companies followed each other offshore to low cost countries, Pashak, a Canadian transplant, was fascinated with Detroit from childhood through popular TV shows and wanted to be part of its economic rebound. He thought a basic bike, perfect for urban areas, might have potential in the U.S. market. Detroit Bikes’ is set to produce 10,000 bikes this year and in doing so will create 50 jobs in a city with high unemployment. Production began slowly until Pashak got his first big order from New Belgium Brewing in Fort Collins, Colo. The company was having trouble finding a U.S.-made bike. Pashak won the 2,500 bike order and was on his way. In the spring of 2016 Pashak won a contract with Motivate, a company that runs bike-sharing programs in 12 metro areas, and uses Detroit Bikes’ assembled bicycles in New York, Boston, and Jersey City. A domestically produced bike gave Motivate a pivotal negotiating advantage when dealing with city governments, yet until finding Detroit Bikes, they struggled to find a U.S. manufacturer that could handle the quantity and specifications they needed. The bikes are assembled in Detroit but the aluminum frames come from Asia. However, Detroit Bikes makes the wheels in-house because they are expensive to transport. According to Motivate’s CEO Jay Walder, manufacturing the wheels domestically enabled the company to reduce the number of shipping containers by two-thirds. Detroit Bikes’ is set to produce 10,000 bikes this year and in doing so will create 50 jobs in a city with high unemployment. Ford Rolls Into the San Francisco Area on a “New” Mode of Transportation In an effort to rework their business strategy for a future where fewer people own cars and shared transportation is commonplace, Ford recently announced it would be collaborating with bike-sharing provider Motivate in San Francisco. “Cities globally are dealing with increased congestion, a growing middle class and environmental issues,” says Jim Hackett, head of the new Ford Smart Mobility unit. “By expanding our business model to include new forms of transportation -- from bikes to dynamic shuttles and more -- we are introducing new customers to Ford and creating new revenue and profit opportunities for the future.” Ford and Motivate are working to add new stations across the Bay Area and expect to expand the network by 7,000 bikes by the end of 2018. Read the Full Article @ IndustryWeekly.com Trunicated and edited, original article by Harry Moser @ IndustryWeek.com
    Apr 01, 2017 241
  • 14 Mar 2017
    Pedal to porch is a neighborhood bike ride that includes stops along the route where residents of the neighborhood use their front porch as a space to tell a story. Porch stories sometimes are entertaining, educational, socially or politically charged, and sometimes the porch stories are history lessons about the neighborhoods themselves. Cornetta Lane, the founder of Pedal to Porch, focuses on civic engagement. “Pedal to Porch helps neighbors engage in conversations that they may not have otherwise.” She goes on to say, “Folks don’t know their neighbors anymore; their stories. The best way to bring neighbors together is to host a bike ride that allows neighbors to be introduced to each other.” Pedal to Porch recently received a Knight City Challenge grant which Cornetta plans to use to expand her project beyond this season’s 3-neighborhood route, perhaps into other cities including Washington D.C. and the Boston area. Pedal to Porch has introduced a docu-series, “Pedaler.” It’s a story about the neighborhoods of Detroit from the voices of its residents.  Watch the preview:
    196 Posted by Aaron Lad
  • Pedal to porch is a neighborhood bike ride that includes stops along the route where residents of the neighborhood use their front porch as a space to tell a story. Porch stories sometimes are entertaining, educational, socially or politically charged, and sometimes the porch stories are history lessons about the neighborhoods themselves. Cornetta Lane, the founder of Pedal to Porch, focuses on civic engagement. “Pedal to Porch helps neighbors engage in conversations that they may not have otherwise.” She goes on to say, “Folks don’t know their neighbors anymore; their stories. The best way to bring neighbors together is to host a bike ride that allows neighbors to be introduced to each other.” Pedal to Porch recently received a Knight City Challenge grant which Cornetta plans to use to expand her project beyond this season’s 3-neighborhood route, perhaps into other cities including Washington D.C. and the Boston area. Pedal to Porch has introduced a docu-series, “Pedaler.” It’s a story about the neighborhoods of Detroit from the voices of its residents.  Watch the preview:
    Mar 14, 2017 196
  • 03 Aug 2016
    Detroit's Fitzgerald neighborhood is working with city officials to repurpose blinghted spaces, turning the land into Greenway spaces, or people-friendly bicycle-friendly promenading spaces.   This is the neighborhood's first shot at repurposing land left bare by the Detroit Land Bank Authority’s demolition brigade. The city’s Housing and Revitalization Department and its Planning and Development Department are seeking developers to take on a two-phase green space revitalization project that will renovate 100 vacant houses, turn 250 vacant lots into urban orchards, gardens and parks. A greenway through the neighborhood would connect the University of Detroit Mercy and Marygrove College. The Fitzgerald project is one of what Detroit Mayor Mike Duggan calls “20-minute neighborhoods” – neighborhoods with necessities such as grocery stores and laundromats within a 20-minute walk. (Source: The Detroit News)
    194 Posted by Aaron Lad
  • Detroit's Fitzgerald neighborhood is working with city officials to repurpose blinghted spaces, turning the land into Greenway spaces, or people-friendly bicycle-friendly promenading spaces.   This is the neighborhood's first shot at repurposing land left bare by the Detroit Land Bank Authority’s demolition brigade. The city’s Housing and Revitalization Department and its Planning and Development Department are seeking developers to take on a two-phase green space revitalization project that will renovate 100 vacant houses, turn 250 vacant lots into urban orchards, gardens and parks. A greenway through the neighborhood would connect the University of Detroit Mercy and Marygrove College. The Fitzgerald project is one of what Detroit Mayor Mike Duggan calls “20-minute neighborhoods” – neighborhoods with necessities such as grocery stores and laundromats within a 20-minute walk. (Source: The Detroit News)
    Aug 03, 2016 194
  • 04 Apr 2017
    Registration for Wayne State's cycling event, "The Baroudeur" is now open! The Baroudeur is a fun, noncompetitive event that gives riders of all abilities an opportunity to explore Detroit and surrounding area on two wheels while helping economically disadvantaged students pursue higher education. The Baroudeur offers three routes to accommodate riders of all experience levels. Ranging from 20 miles all the way up to the 100 mile century ride, The Baroudeur will take you to some of Detroit and Southeast Michigan's most iconic sights and landmarks. Baroudeur means fighter or warrior in French. It is a term used in cycling for riders not afraid to break away from the peloton and do things on their own, even if they might be an underdog. In Paul Fournel's collection of cycling essays, Vélo, he describes baroudeurs as "adventurers, opportunists and chancers. They do not seek the love of their colleagues in the peloton, but strain at the leash, pushing against convention, experimenting and taking risks. They are generalists and polymaths, adept at multiple disciplines." Read more about The Baroudeur in the directory.
    182 Posted by Systems Admin
  • Registration for Wayne State's cycling event, "The Baroudeur" is now open! The Baroudeur is a fun, noncompetitive event that gives riders of all abilities an opportunity to explore Detroit and surrounding area on two wheels while helping economically disadvantaged students pursue higher education. The Baroudeur offers three routes to accommodate riders of all experience levels. Ranging from 20 miles all the way up to the 100 mile century ride, The Baroudeur will take you to some of Detroit and Southeast Michigan's most iconic sights and landmarks. Baroudeur means fighter or warrior in French. It is a term used in cycling for riders not afraid to break away from the peloton and do things on their own, even if they might be an underdog. In Paul Fournel's collection of cycling essays, Vélo, he describes baroudeurs as "adventurers, opportunists and chancers. They do not seek the love of their colleagues in the peloton, but strain at the leash, pushing against convention, experimenting and taking risks. They are generalists and polymaths, adept at multiple disciplines." Read more about The Baroudeur in the directory.
    Apr 04, 2017 182
  • 24 May 2016
    Detroit Bike City.com is now online. The site is designed so that local cyclists can stay connected with one another.The site is designed to bring local cyclists together so that local cyclists can more easily collaborate locally. The site gives members the ability to find one another easily by location, ride style, interests or whatever. The site also is setup with a cool calender and a wiki that enables locals to find rides, events and detailed information.One of the main features of the site are the blogs. The blogs are setup to allow specific members the ability to share stories and start conversations about events or specific interests. The site is currently in development. There are many changes and additions that need to be made. With your help we can move this project along at a quicker pace. If you would like to be involved with the project please contact the site's Aaron Lad or the site's administrator. Thanks!
    174 Posted by Systems Admin
  • Detroit Bike City.com is now online. The site is designed so that local cyclists can stay connected with one another.The site is designed to bring local cyclists together so that local cyclists can more easily collaborate locally. The site gives members the ability to find one another easily by location, ride style, interests or whatever. The site also is setup with a cool calender and a wiki that enables locals to find rides, events and detailed information.One of the main features of the site are the blogs. The blogs are setup to allow specific members the ability to share stories and start conversations about events or specific interests. The site is currently in development. There are many changes and additions that need to be made. With your help we can move this project along at a quicker pace. If you would like to be involved with the project please contact the site's Aaron Lad or the site's administrator. Thanks!
    May 24, 2016 174
  • 07 Mar 2017
    A new plan by the Detroit RiverFront Conservancy calls for the creation of two new pathways to the river similar to the Dequindre Cut. The project plans to expand the decade long transformation of the riverfront district from an industrial sector to public, recreational-use center, which will spur new people-friendly developments in the district. The framework plan also envisions added preservation of about 8 acres of land for public use, particularly from Atwater Street south to the river, and Stroh River Place and Rivard Plaza; an eastward expansion of the Detroit RiverWalk; safety improvements along East Jefferson Avenue. The Joseph Campau Greenway plans to run from East Vernor Highway south to the river, while the Beltline Greenway, between Belleview and Beaufait streets, runs from Kercheval Street to the river. Mark Wallace, president and CEO of the Detroit RiverFront Conservancy, said that the construction on the nearly 2-mile Joseph Campau Greenway is expected to begin next year, while the 1.5-mile Beltline Greenway should begin construction toward the end of this year or early into next year. Three sites previously expected to be privately developed are now planned for public use. The property was previously planned as a site for former mayor Dave Bing's  $60 million Watermark residential development. A groundbreaking is expected this year on the promenade linking the Detroit RiverWalk from Mt. Elliott Park to the Douglas MacArthur Bridge running along the Uniroyal Tire Co. site. In addition to the new pathways, things like improved crosswalks and new bike lanes are expected as part of the plan. The overall improvement program is expected to be jointly funded by the conservancy of Detroit and the Economic Development Corp. The total cost of the improvements was not available. Source: Crains Detroit
    168 Posted by Aaron Lad
  • A new plan by the Detroit RiverFront Conservancy calls for the creation of two new pathways to the river similar to the Dequindre Cut. The project plans to expand the decade long transformation of the riverfront district from an industrial sector to public, recreational-use center, which will spur new people-friendly developments in the district. The framework plan also envisions added preservation of about 8 acres of land for public use, particularly from Atwater Street south to the river, and Stroh River Place and Rivard Plaza; an eastward expansion of the Detroit RiverWalk; safety improvements along East Jefferson Avenue. The Joseph Campau Greenway plans to run from East Vernor Highway south to the river, while the Beltline Greenway, between Belleview and Beaufait streets, runs from Kercheval Street to the river. Mark Wallace, president and CEO of the Detroit RiverFront Conservancy, said that the construction on the nearly 2-mile Joseph Campau Greenway is expected to begin next year, while the 1.5-mile Beltline Greenway should begin construction toward the end of this year or early into next year. Three sites previously expected to be privately developed are now planned for public use. The property was previously planned as a site for former mayor Dave Bing's  $60 million Watermark residential development. A groundbreaking is expected this year on the promenade linking the Detroit RiverWalk from Mt. Elliott Park to the Douglas MacArthur Bridge running along the Uniroyal Tire Co. site. In addition to the new pathways, things like improved crosswalks and new bike lanes are expected as part of the plan. The overall improvement program is expected to be jointly funded by the conservancy of Detroit and the Economic Development Corp. The total cost of the improvements was not available. Source: Crains Detroit
    Mar 07, 2017 168
  • 25 Jan 2017
    This past Tuesday the city of Detroit held a ground breaking ceremony at Tolan Feild for a $4-million dollar multi-sport velodrome complex. Construction of the facility will begin this spring. It is projected to be completed sometime this summer. The project is currently being funded by The Detroit Fitness Foundation(DFF). In addition to the indoor velodrome, the DFF is donating $125,000 for additional outdoor improvements, like a small skate park, a practice soccer field. The city has also committed a cool $250,000 for some improved outdoor features including playground equipment, a picnic shelter, tables, fitness station and horseshoe pits. The city's mayor, Mike Duggan said "Having safe and healthy spaces within our neighborhoods for families to live and play is essential to our city's continued growth. The Detroit Fitness Foundation initiative will be a great asset to our community and its residents." The velodrome was designed by Dale Hughes a resident of Rochester Hills. Dale has designed and built more than 20 velodromes around the world, including the 1996 Olympic Velodrome in Atlanta and the 2015 Pan Am Games Velodrome in Toronto. Hughes is the executive director of the DFF and the owner of V-Worldwide, a construction company specializing in velodrome construction. "Our goal is to provide kids with opportunities to turn the Olympic dream into a reality," Hughes said. "I've had the honor of working on projects around the world but I am thrilled to bring this state-of-the-art indoor complex to my back yard in the city of Detroit!" DFF is seeking a naming rights sponsor and offering additional sponsorship opportunities for the complex. More to come soon!
    135 Posted by Aaron Lad
  • This past Tuesday the city of Detroit held a ground breaking ceremony at Tolan Feild for a $4-million dollar multi-sport velodrome complex. Construction of the facility will begin this spring. It is projected to be completed sometime this summer. The project is currently being funded by The Detroit Fitness Foundation(DFF). In addition to the indoor velodrome, the DFF is donating $125,000 for additional outdoor improvements, like a small skate park, a practice soccer field. The city has also committed a cool $250,000 for some improved outdoor features including playground equipment, a picnic shelter, tables, fitness station and horseshoe pits. The city's mayor, Mike Duggan said "Having safe and healthy spaces within our neighborhoods for families to live and play is essential to our city's continued growth. The Detroit Fitness Foundation initiative will be a great asset to our community and its residents." The velodrome was designed by Dale Hughes a resident of Rochester Hills. Dale has designed and built more than 20 velodromes around the world, including the 1996 Olympic Velodrome in Atlanta and the 2015 Pan Am Games Velodrome in Toronto. Hughes is the executive director of the DFF and the owner of V-Worldwide, a construction company specializing in velodrome construction. "Our goal is to provide kids with opportunities to turn the Olympic dream into a reality," Hughes said. "I've had the honor of working on projects around the world but I am thrilled to bring this state-of-the-art indoor complex to my back yard in the city of Detroit!" DFF is seeking a naming rights sponsor and offering additional sponsorship opportunities for the complex. More to come soon!
    Jan 25, 2017 135
  • 05 Apr 2017
    The Fisher Halfpipe is concept art installment curated by Everard Findlay, the project delves into the ideal of how sports such as skateboarding and bmx can transcend social barriers such as race, class or culture. The Halfpipe currently sits in the main arcade of the Fisher Building Lobby. The Fisher Halfpipe opened for public viewing on Monday night. Professional and semi-professional skateboarders, inline-skaters and BMX bikers will be performing on the Halfpipe April 3rd through the 6th. It's open to the public 6pm to 9pm each evening. The event includes live music and stuff to eat. The 26-foot, 16-foot wide halfpipe was built by Ramped Construction. The artwork on the Halfpipe was painted by local artists Hillary Butterworth, Miranda Wedge, and Brian Oscar; their instagrams show the progress as they painted the halfpipe start to finish. The ramp is part of an ongoing project called, “The Fisher Beacon Project.” The campaign aims at drawing-in visitors to the historic building through performance art and interesting exhibitions.
    128 Posted by Aaron Lad
  • The Fisher Halfpipe is concept art installment curated by Everard Findlay, the project delves into the ideal of how sports such as skateboarding and bmx can transcend social barriers such as race, class or culture. The Halfpipe currently sits in the main arcade of the Fisher Building Lobby. The Fisher Halfpipe opened for public viewing on Monday night. Professional and semi-professional skateboarders, inline-skaters and BMX bikers will be performing on the Halfpipe April 3rd through the 6th. It's open to the public 6pm to 9pm each evening. The event includes live music and stuff to eat. The 26-foot, 16-foot wide halfpipe was built by Ramped Construction. The artwork on the Halfpipe was painted by local artists Hillary Butterworth, Miranda Wedge, and Brian Oscar; their instagrams show the progress as they painted the halfpipe start to finish. The ramp is part of an ongoing project called, “The Fisher Beacon Project.” The campaign aims at drawing-in visitors to the historic building through performance art and interesting exhibitions.
    Apr 05, 2017 128
  • 13 Mar 2017
    Momentum Magazine — US cities are undergoing rapid changes. The rising costs of road building and maintenance, combined with out-of-control congestion and urban pollution, are forcing many cities to rethink the way they allocate space on the roads. Where 10, even five years ago, widening or expanding driving lanes seemed like an economically feasible and practical solution to urban transportation demands, the tide is beginning to change. Cities are beginning to realize that prioritizing cars in transportation planning is not only expensive in the short term, but comes with a whole whack of externalities such as lost productivity due to time spent in traffic, decreasing mental and physical health of residents, and a compromised environment. So it doesn’t come as much of a surprise that, in the recently released 2015 Menino Survey of Mayors, a full 70% of mayors surveyed responded “Agree” or “Strongly Agree” when presented with the idea, “Cities should make their roads more accessible to bicycles even if it means sacrificing driving lanes and/ or parking.” The Menino Survey – a project of the US Conference of Mayors and the Boston University Initiative on Cities– interviewed 89 mayors from 31 different states on a wide range of issues affecting urban policy in the US. Of those surveyed, 63 were mayors of cities with over 100,000 residents, and the demographics of each city on indicators such as population density, racial demographics, and economic characteristics represent the diversity of the nation as a whole. See the full article and surveys @ Momentum Magazine
    105 Posted by Aaron Lad
  • Momentum Magazine — US cities are undergoing rapid changes. The rising costs of road building and maintenance, combined with out-of-control congestion and urban pollution, are forcing many cities to rethink the way they allocate space on the roads. Where 10, even five years ago, widening or expanding driving lanes seemed like an economically feasible and practical solution to urban transportation demands, the tide is beginning to change. Cities are beginning to realize that prioritizing cars in transportation planning is not only expensive in the short term, but comes with a whole whack of externalities such as lost productivity due to time spent in traffic, decreasing mental and physical health of residents, and a compromised environment. So it doesn’t come as much of a surprise that, in the recently released 2015 Menino Survey of Mayors, a full 70% of mayors surveyed responded “Agree” or “Strongly Agree” when presented with the idea, “Cities should make their roads more accessible to bicycles even if it means sacrificing driving lanes and/ or parking.” The Menino Survey – a project of the US Conference of Mayors and the Boston University Initiative on Cities– interviewed 89 mayors from 31 different states on a wide range of issues affecting urban policy in the US. Of those surveyed, 63 were mayors of cities with over 100,000 residents, and the demographics of each city on indicators such as population density, racial demographics, and economic characteristics represent the diversity of the nation as a whole. See the full article and surveys @ Momentum Magazine
    Mar 13, 2017 105